Orca slicer is a fantastic tool, and the Creality K1 series of printers are amazing 3D printers! But by default, Orca Slicer doesn’t have K1, K1 Max, or K1C profiles. Don’t worry; the Creality community has made all the Orca Slicer profiles and configuration files you need! 🥳
Download Orca Slicer Profiles For The K1
Thanks to Printables user Ripley, we have complete Orca Slicer profiles for the K1, K1 Max, and K1C. To download the Orca profiles, visit the following link, look for the “Other files” header, and select your K1 or K1 Max printer. If you’re using a K1C, you can use the K1 Max Orca Slicer profiles.
Link To Orca Slicer Profiles: https://www.printables.com/model/536422-creality-k1k1-max-orcaslicer-profile/files
Install the Orca Slicer Profiles
Once the download is complete, the file will be in your Downloads folder. The file is a compressed .zip file; you must extract it before using it. To extract it, open the Windows or Mac file explorer, go to your downloads folder, right-click the file, and select “Extract All”
Now you are ready to install. Open Orca Slicer and select “File” at the top right of the window. From the File menu, select “Import” and then “Import Configs.” This will open a system file picker. To go to your downloads folder, open the extracted output folder and select all of the files. Click “Open,” and you’re done!
Use The K1 Profile In Orca Slicer
Once the profiles are imported, you can select them like any other printer profile. Using the “Preview” tab, look for the “Printer” section. Open the drop-down box and choose your K1 printer profile.
That’s all! You can now fully use Orca Slicer with your Creality K1 printer!
